Profile Picture
Dr. Paresh Kumar Mandal

Assistant Professor, Assistant Professor Level 12

Appointment : Permanent

Date of Joining : 30-06-2015

AICTE Id : 1-2650287953

https://pkm2.amaljyothi.ac.in

Areas of Interest

  • Development of HSLA steels
  • Development of Aluminium alloys (i.e., 7xxx series)
  • Impression creep testing of Cr-Mo weldments.

Area of Specialization

  • Physical Metallurgy, Mechanical Metallurgy

C/o. Mr. Biplab Mondal, Netaji Pally , Sonarpur, Kamrabad Area, 24 Parganas (South) - 700150 West Bengal, Kolkata

Dr. Paresh Kumar Mandal

Assistant Professor, Metallurgical & Materials Engineering

Appointment : Permanent , Date of Joining : 30-06-2015



Disciplinary Action Committee Member,Research Secretary,Students Club Mentor
  • Ph. D- Mechanical Metallurgy - IIT Roorkee(2017)
  • M.Tech- Metallurgy - Indian Institute of Technology Kharagpur(2000)
  • B.Tech- Metallurgy - National Institute of Technology Karnataka, Surathkal(1997)

  • ResearchAssistant in National Metallurgical Laboratory, Jamshedpur-831007. from 2006 to 2008
  • Engineer in M/s. SRMB SRIJAN PVT. LTD., Sagar Banga, Durgapur-11, West Bengal. 2006
  • Engineer in M/s. EDCONS (MKS) CASTINGS PVT. LTD., Jagatnathpur, Hooghly, West Bengal. from 2004 to 2005
  • ResearchAssistant in Jadavpur University, Kolkata-700032. from 2002 to 2004
  • ResearchAssistant in Indian Institute of Technology Kharagpur from 2001 to 2002
  • Engineer in M/s. KISWOKS INDUSTRIES PVT. LTD., Jalan complex, Howrah, West Bengal 2000
  • Awarded membership from International Association of Engineers (IAENG) , awarded IAENG
  • Awarded membership from The Indian Institute of Mineral Engineers , awarded IIME
  • Awarded membership from Indian Institute of Metals, awarded IIM
  • Awarded membership from Institute of Engineers(I), awarded IEI
  • Awarded membership from Indian Institute of Foundrymen, awarded IIF

  • GATE,  1998

  • Characterization of fine precipitates evolution in post ageing treatment after friction stir processed 7075Al Alloy ,2020, International Journal of Engineering Research & Science (IJOER)
  • Mechanism of Fracture in Friction Stir Processed Aluminium Alloy ,2019, International Journal of Engineering and Management Research
  • Effect of heat treatment and microalloying element on the microstructure and properties of HSLA steels ,2019, Indian Foundry Journal
  • Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of Ti-Al-V for alloy structural and Biomedical Applications ,2019, Indian Foundry Journal
  • Effect of ageing treatment on microstructure and mechanical properties of + type titanium alloy used for biomaterials ,2019, Materials Science and Engineering
  • Effect of Scandium on Homogenization Treatment and Friction Stir Processing on Mechanical Properties of 7075 Aluminium Alloy Prepared by Foundry Route ,2019, Materials Science and Engineering
  • Investigation of Precipitation Behavior and Related Micro structural and Mechanical Properties after FSP of Aluminium Alloy ,2019, International Advance Journal of Engineering Research
  • Characterization of fine precipitates evolution in post ageing treatment after friction stir processed 7075Al Alloy ,2019, International Journal of Engineering Research & Science (IJOER)
  • Effect of Scandium on Homogenization Treatment and Friction Stir Processing on Mechanical Properties of 7075 Aluminium Alloy Prepared by Foundry Route ,2019, Materials Science and Engineering
  • Effect of FSP on Strength And Fracture Toughness of Aluminium Alloy 7000 ,2018, Applied Mechanics and Materials
  • Heat Treatment and Friction Stir Processing Effects on Mechanical Properties and Microstructural Evolution of Sc Inoculated Al-Zn-Mg Alloys ,2017, Materials Science and Metallurgy Engineering
  • Effect of scandium on ageing kinetics in Al-Zn-Mg alloys ,2017, Materials Science & Engineering A
  • Investigation of Microstructure and Mechanical properties of Al-Zn-Mg and Al-Zn-Mg-Sc Alloys After Double Passes Friction Stir Processing ,2017, International Journal of Materials Science and Engineering
  • A refined energy-based model for friction stir processing of Al-Zn-Mg Alloy ,2016, International Journal of Engineering Research and Applications
  • Fine-Grained Cast Aluminium Alloy Produced In Situ By Friction Stir Processing ,2016, International Journal of Engineering Research and Development
  • Study on hardening mechanisms in aluminium alloys ,2016, International Journal of Engineering Research and Applications
  • Microstructural Refinement Through Sc Inoculation and Its Effect on Mechanical Properties of As-Cast 7XXX Series Al alloys ,2016, International Journal of Engineering Research and Development
  • Characterisation and Modeling of Precipitation Kinetics in 7075 Al-Zn-Mg Alloy ,2016, International Journal of Modern Engineering Research
  • Effect of Small Addition of Sc In Artificially Aged of Cast Al-Zn-Mg Alloy ,2016, International Journal of Technology Enhancements and Emerging Engineering Research
  • Experimental Analysis of Microstructure and Mechanical Behaviour in Fine Grained Al-Zn-Mg Alloy ,2016, International Journal of Scientific Research in Science, Engineering and Technology
  • EXPERIMENTAL INVESTIGATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-Zn-Mg-Sc ALLOYS ,2016, International Journal of Mechanical and Production Engineering Research and Development
  • Study on GP-Zones Formation in the Sc Inoculated Ternary Al-Zn-Mg Alloys ,2016, Journal of Materials & Metallurgical Engineering
  • An experimental study on thermal study of age-hardenable aluminium alloys modified by scandium inoculation ,2015, Materials Science Forum
  • A New Surface Modification Technique and Their Characterisation: Friction Stir Processing of Al-Zn-Mg Alloy ,2015, International Journal of Engineering Research and Applications
  • Processing and Characterization of Al3Sc precipitates in Cast Aluminium Alloy by Foundry Route ,2015, Journal of Advanced Research in Manufacturing, Material Science& Metallurgical Engineering
  • An experimental study on thermal study of age-hardenable aluminium alloys modified by scandium inoculation ,2015, Materials Science Forum
  • Effect microalloying elements on mechanical properties in the strength low alloy steel ,2015, Materials Science Forum
  • Experimental Assessment of Fatigue and Tensile Strength on Ageing Properties of Al-Zn-Mg Alloys ,2015, Journal of Materials Science & Surface Engineering
  • High temperature impression creep testing of 9Cr-1Mo and 2.25Cr-1Mo dissimilar weldment ,2015, Journal of Advanced Research Publication
  • Development of high strength Al-Zn-Mg alloys for automotive application ,2014, Indian Foundry Journal
  • Development of cast high strength microalloyed steels ,2004, International Journal of Cast Metals Research
  • Formability of commercially pure aluminium at different temperatures from 303 K to 673 K ,2004, Aluminium in India
  • Advances in friction stir processing of high strength aluminium alloy ,2019, 34th IEC, The Institution of Engineers (India), Hyderabad Chapter, Telengana State
  • INFLUENCE OF Ta+Nb ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FERRITIC STAINLESS STEEL TIG WELDMENTS ,2019, Fatigue Durability India- 2019, VTU, Belagavi, Karnataka
  • Effect of Artificial Ageing Treatment and Precipitation on Mechanical Properties and Fracture Mechanism of Friction Stir Processed MgZn2 and Al3Sc phases in Aluminium Alloy ,2019, IConAMMA 2019, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Bangaluru
  • Experimantal investigation on Al-Zn-Mg alloys after friction stir processing and their engineering applications ,2019, NAFEMS India Regional Conference-NIRC 2018 on Engineering Modeling, Analysis, Simulation & 3D printing, Bangaluru
  • OPTIMIZATION OF TIG WELDING INFLUENCED BY Nb+Ta BASED FILLER WIRE FOR FERRITIC STAINLESS STEEL ,2019, AICERA-2019, Dept. of Mechanical in AJCE, Kerala
  • Effect of ageing treatment on microstructure and mechanical properties of ??+?? type titanium alloy used for biomaterials ,2019, ICMSMT-2019, Sri Shakthi Institute of Engineering and Technology, Coimbatore, Tamil Nadu,
  • Effect of heat treatment and microalloying element on the microstructure and properties of HSLA steels ,2019, 67th IFC, Greater Noida, New Delhi
  • Effect of cryogenic treatment on the microstructure and mechanical properties of Ti-Al-V alloy for structural and biomedical applications ,2019, 67th IFC, Greater Noida, New Delhi
  • Investigation of precipitation behaviour and related microstructural and mechanical properties of friction stir processed Al-Zn-Mg Alloy ,2018, ICAMPS-2018, IIM Trivandrum Chapter, Kerala
  • Effect of Scandium on Homogenization Treatment and Friction Stir Processing on Mechanical Properties of 7075 Aluminium Alloy Prepared by Foundry Route ,2018, Advances in Materials & Manufacturing Applications organized by Amrita Vishwa Vidyapeetham, Bangaluru
  • Impression creep testing of Cr-Mo steel weldments and subsequent post weld heat treatment for high temperature applications ,2018, Development, Processing and Applications of High Temperature Materials- Current Trends and Challenges Ahead, IIM Hyderabad Chapter and MIDHANI at Hyderabad
  • Mechanism of fracture in friction stir processed aluminium alloy ,2018, 66th IFC- 2018, Gandhinagar, Gujarat
  • Effect of Zn on improving mechanical properties of Al-Zn-Mg-Sc alloy through friction stir processing ,2017, NMD ATM -2017, IIM Mumbai chapter at BITs Pilani KK Birla, Goa
  • Characterization of fine precipitates evolution in post ageing treatment after friction stir processed 7075 Al alloy ,2017, ICEAME AICERA 2017, DCE &MME &Basic Sc. in AJCE, Kerala
  • Effect of FSP on strength and fracture toughness of aluminium alloy 7000 ,2017, ICRAMMCE-2017, DME & DCE in Marri Laxman Reddy Institute of Technology & Management, Hyderabad
  • GRAIN REFINEMENT MECHANISM AND ITS EFFECT ON STRENGTH AND FRACTURE TOUGHNESSPROPERTIES OF Al-Zn-Mg ALLOY ,2016, Fatigue Durability India -2016, JRD Tata Auditorium, IISc Bangalore
  • Investigation on transition phases in Al-Zn-Mg alloys after T6-ageing treatment ,2016, 64th IFC, Codissia Tradefair Complex, Coimbatore, Tamil Nadu
  • EXPERIMENTAL ASSESSMENT OF FATIGUE AND TENSILE STRENGTH ON AGEING PROPERTIES OF Al-Zn-Mg ALLOYS ,2015, Fatigue Durability India -2015, JRD Tata Auditorium, IISc Bangalore
  • An experimental study on thermal stability of age-hardenable aluminium alloys modified by scandium inoculation ,2015, ICAMPS 2015, IIM Trivandrum Chapter, Thiruvananthapuram, Kerala
  • Effect of microalloying elements on mechanical properties in the high strength low alloy steels ,2015, ICAMPS 2015, IIM Trivandrum Chapter, Thiruvananthapuram, Kerala
  • EFFECT OF Sc IN ARTIFICIALLY AGED Al-Zn-Mg ALLOY ,2015, IFC-2015, India Expo Centre, Greater Noida, NCR, New Delhi
  • EXPERIMENTAL ANALYSIS OF MICROSTURCTURE AND MECHANICAL BEHAVIOUR IN FINE GRAINED ALUMINIUM ALLOY ,2015, IFC-2015, India Expo Centre, Greater Noida, NCR, New Delhi
  • High temperature impression creep testing of 9Cr-1Mo and 2.25Cr-1Mo dissimilar weldment ,2015, SWR-2015, Graphic Era Hill University, DME, Dehradun, Uttarakhand,
  • Characterisation and modeling of precipitation kinetics in 7075 Al Alloy ,2014, Emerging Materials & Applications, IIT Roorkee, Saharanpur Campus, Uttarakhan
  • Refined energy-based models for friction stir processing of Al alloy ,2014, Emerging Materials & Applications, IIT Roorkee, Saharanpur Campus, Uttarakhan
  • Evaluation of fracture toughness of cast Al-Zn-Mg alloys ,2014, 62nd IFC, Gandhinagar, Gujarat
  • Processing and characterisation of Al3Sc precipitates by cast metallurgy method ,2014, AMSEA, UPES, Dept. of Physics, Dehradun, Uttarakhand
  • A New Surface Modification and Characterisation Technique: Friction Stir Processing of Light Aluminium Alloy ,2014, AMSEA, UPES, Dept. of Physics, Dehradun, Uttarakhand
  • Hardening mechanisms in aluminium alloys ,2013, RTME-2013, BRCM College of Engineering & Technology, DME, Bahal, Haryana
  • Fine-grained cast aluminium alloy produced in situ by friction stir processing ,2013, RTME-2013, BRCM College of Engineering & Technology, DME, Bahal, Haryana
  • Studies on GP-zones formation in the Al-Zn-Mg-Sc alloy system ,2013, EEMR-13, CSIR-IMMT, Bhubaneswar, Odisha
  • Characterization of microstructural and mechanical properties in 7xxx series of aluminium alloys via multipasses friction stir processing ,2013, EMR-13, CSIR-IMMT, Bhubaneswar, Odisha
  • Heat treatment and friction stir processing effects on mechanical properties and microstructural evolution of Al-Zn-Mg-Sc alloys ,2013, CST 2013, MMED, NIT Trichy
  • Evolution on microstructural and mechanical properties of Al-Zn-Mg-Sc alloys ,2013, CPIE-2013, DMPE, NIT Jalandhar
  • Microstructural refinement through scandium inoculation and its effect on mechanical properties of as-cast Al-Zn-Mg alloys ,2012, ISRS 2012; MMED, IIT Madras
  • Effect of minor scandium addition on microstructure and mechanical properties of as-cast Al-Zn-Mg alloys ,2012, Advances in Materials and Processing; MMED, IIT Roorkee
  • Impression Creep: a new creep testing of weldments ,2003, Conf. of NWS Salt Lake City, Kolkata
  • Preparation of lean grade ferroalloys and its application in the production of microalloyed steels ,2001, Advances in Materials & Processing; MMED, IIT Roorkee
  • Development of as cast high strength low alloy steels ,2001, IIF Seminar in IISCO, Burnpur Chapter, West Bengal

Training programs attended

  • Administrative Training Program OBE-Computation & Attainments and Accreditation Workspace in AES, Amal Jyothi College of Engineering, Amal Jyothi College of Engineering, from 2022-11-08 to 2022-11-08
  • Administrative Training Program - Moodle LMS Management, Marian College Kuttikkanam (Autonomous), Amal Jyothi College of Engineering, from 2020-07-16 to 2020-08-04
  • Administrative Training Program Essentials of OBE and NBA / NAAC documentation, Amal Jyothi College of Engineering, Amal Jyothi College of Engineering, from 2019-08-26 to 2019-08-26

Current Responsibilities

  • Disciplinary Action Committee Member
  • Research Secretary
  • Students Club Mentor

Specialized Trainings

  • GIAN (Global Initiative of Academic Networks) course on Crystallography for Materials Scientists, MMED in IIT Roorkee, 2016-12-05
  • GIAN (Global Initiative of Academic Networks) course on Microstructural Engineering and Properties of Advanced Ceramics, MMED in IIT Roorkee, 2016-11-15
  • Attended one day QIP workshop on Failure Analysis and Life Assessment, MIED, IIT Roorkee, 2015-03-14
  • Supervised of In-Situ-Metallography (Stainless steel pipes of tubular furnaces), M/S. Indian Oil Corporation Ltd., Haldia site, Purba Midnapur, 2004-11-30
  • Industrial training undergone in Steel Melting Shop,  M/S.CANARA STEEL, Mangalore, Karnataka, 1997-06-15


© 2024 Amal Jyothi College of Engineering